Back to product
Seleziona lingua:

SEPDISP40

Modification instructions for Audi A4 B5 and A8 D2 display

WARNING: THIS PROCESS IS RECOMMENDED ONLY TO EXPERT AND QUALIFIED STAFF

Before installing the new SEPDISP40 display, please read the following instructions carefully.
DO NOT SKIP ANY STEPS.

Download the printable PDF

Seal the flat cable of the new display on the PCB of the instrument cluster with a soldering iron with “T” tip at 350° C

Pic. 1

Fit the display on its base and position the frame supplied with the kit as in picure 1. Lastly, overlap the original metal frame as in picture 2.

Pic. 2